Stainless steel sump  filters elements for use with water and special fluids. Capacities: 10 20 30 50 and 75 gpm.
Pipe sizes: 1", 1-1/4" , 1-1/2", 2" and 2-1/2" npt male and female as well as "O" ring seal. Operating temperatures:
Up to 300F. No by pass. Unique Marvelmag magnetic shield protects entire hydraulic system from those ever
present ferric contaminants.
Bonded Sump Type Filters - All Stainless Steel
contaminants (that do the most damage to system components) arc instantly trapped by complete, outer MarvelMag Magnetic
Shield BEFORE they can reach element, keeping it-and entire system~lean, undamaged and functioning at top efficiency for much
longer periods without servicing. Ferric particles small enough to pass through clement and on into system arc most speedily
trapped and retained by the all-encircling magnetic shield. Generous flow areas between magnetic rods remain uncluttered, greatly
increasing filter efficiency and life. The magnetic rods do not increase element dimensions, providing complete interchangeability
of MarvelMag elements with non-magnetic clements.
Size
10 GPM
20 GPM
30 GPM
50 GPM
75 GPM
Port
1" NPTM
1-1/4" NPTM
1-1/2" NPTM
2" NPTM
2-1/2" NPTM
W only
.13
.10
.15
.15
.18
 
Presser Drop PSI
 
Approx wt lbs
 
Dimensions Inches
MESH
Model Number
1000 Series
3/4
1
1-1/4
1-1/2
2
A
2.62
3.09
3.38
3.94
4.38
B
4.56
7.06
8.06
9.06
9.62
E
.44
.44
.44
.50
.88
100
1010-100
1020-100
1030-100
1050-100
1075-100
80
1010-8-
1020-80
1030-80
1050-80
1075-80
60
1010-60
1020-60
1030-60
1050-60
1075-60
50
1010-50
1020-50
1030-50
1050-50
1075-50
40
1010-40
1020-40
1030-40
1050-40
1075-40
30
1010-30
1020-30
1030-30
1050-30
1075-30
20
1010-20
1020-20
1030-20
1050-20
1075-20
150
1010-150
1020-150
1030-150
1050-150
1075-150
200
1010-200
1020-200
1030-200
1050-200
1075-200